Buying a loader crane is a capital decision, not a one-off purchase. The purchase figure matters, but it is only the first of several costs you carry for the entire working life of the machine. This guide explains what really drives the cost of owning a COPMA truck-mounted knuckle-boom crane, and why COPMA is engineered so the crane earns its keep year after year.
COPMA does not publish a public list price, and there is a sound reason for that: no two loader cranes leave the factory identical. The price depends on the model and class you choose, the number of hydraulic extensions, the boom and jib configuration, the control system, and the equipment fitted for your application and your truck.
So the honest answer to 'how much does a COPMA crane cost?' is a configured quote rather than a shelf price. The COPMA range runs from compact 3.5 tonne-metre Essential models up to Top Range units of 750 tonne-metres, so the right starting point is the lifting job, not a single number. Request a quote and an authorised dealer will price the exact configuration you need.
For capital equipment, the purchase price is usually a minority of what the machine costs you over its life. The figure that decides whether a crane is a good buy is its total cost of ownership: everything you spend to keep it lifting, spread across the years you own it.
As a general principle for any loader crane, total cost of ownership is built from these factors:
Seen this way, the cheapest crane to buy is not necessarily the cheapest crane to own. A machine that sits idle waiting for parts, or that no local technician can service, can cost far more over ten years than its purchase price ever suggested.
COPMA loader cranes are engineered and built in Italy by CPS Group, and the design priorities map directly onto the total cost of ownership factors above.
Every COPMA crane is designed and manufactured in Italy to a consistent engineering standard. Build quality is what keeps a crane reliable in the field and protects its value over time.
COPMA is supported by genuine spare parts and a network of authorised dealers and service partners. Genuine parts and field service keep downtime short, and short downtime is where the real savings in total cost of ownership are found.
COPMA cranes are load tested and backed by warranty. Testing and certification support safe, compliant operation and reduce the risk of unplanned stoppages.
The COPMA Essential range is designed to be cost-effective: dependable lifting at a sensible price for operators who need a straightforward, hard-working crane. Essential models start at 3.5 tonne-metres, with a lifting moment around 30 kN·m and an own weight from roughly 455 kg on the smallest unit.
COPMA is organised into three families: Essential, High Power and Top Range. Together they span roughly 3.5 to 750 tonne-metres of lifting capacity. Matching the crane to the job, instead of over-buying, is one of the simplest ways to keep total cost of ownership down, and a full range makes that possible.
Over-specifying a crane adds weight, cost and unused capability. Under-specifying it shortens the machine's life and limits the work you can take on. The lifting moment, expressed in kN·m, and the number of extensions are the two figures that most affect both price and capability. An authorised dealer will help you match the class and configuration to your typical loads and reach before you commit.
COPMA does not publish public list prices because each crane is configured to the customer's truck, application, boom and extension setup, and control system. The price depends on the model and class (Essential, High Power or Top Range) and the equipment fitted. The range runs from compact 3.5 tonne-metre Essential cranes to Top Range units up to 750 tonne-metres, so the accurate figure is a configured quote. Request a quote from an authorised dealer for a price specific to your setup.
Total cost of ownership is everything the crane costs over its working life, not just the purchase price. In general it combines purchase and financing, genuine spare parts, uptime and reliability, service and support, compliance and load testing, fuel and productivity, and resale value. For most owners the purchase price is a minority of the lifetime cost, and downtime and parts availability are the biggest variables.
COPMA is supported by genuine spare parts and a network of authorised dealers and service partners, with field service available. Using genuine parts and an established service network is what keeps downtime short and protects the crane over its working life.
Residual value on any loader crane is driven by build quality, maintenance history, parts availability and how well the machine has been looked after. COPMA cranes are engineered and built in Italy and supported by genuine parts and service, which are exactly the factors that help a well-maintained crane hold its value. A documented service history using genuine parts is the best way to protect resale value.
The most reliable way to learn what a COPMA crane will cost you, both to buy and to own, is a configured quote for your application. Request a quote and an authorised COPMA dealer will build a specification and a price around the lifting work you actually do.