Nine COPMA loader crane models have a certified maximum reach greater than 30 metres.
In ascending model order they are the COPMA 450, 650, 820, 950, 1400, 1600, 2000, 3500 and 7500.
Each maximum reach below is measured with the jib fitted.
Every figure is taken from the certified load chart for that model.
COPMA cranes are truck-mounted knuckle-boom loader cranes.
Heavy haulage work often needs a load placed far from the truck.
Horizontal outreach sets how far a loader crane can place a load from its base.
A long boom reaches across a trailer bed or an obstacle from one truck position.
Lifting capacity is a curve over reach, so the load falls as the boom extends.
These nine models combine a long certified reach with a high close-in capacity.
The COPMA 3500 reaches 50.79 m with the jib fitted.
It carries about 280 kg at that distance.
On the standard boom without a jib it reaches 26.65 m.
It lifts up to 49,500 kg close in at 5.5 m.
It is rated at 350 tonne-metres.
It uses 9 hydraulic boom extensions.
It belongs to COPMA's TOP RANGE line.
The COPMA 7500 reaches 46.5 m with the jib fitted.
It carries about 2,300 kg at that distance.
On the standard boom without a jib it reaches 22.4 m.
It lifts up to 104,700 kg close in at 6.2 m.
It is rated at 750 tonne-metres.
It uses 6 hydraulic boom extensions.
The COPMA 1600 reaches 36 m with the jib fitted.
It carries about 575 kg at that distance.
On the standard boom without a jib it reaches 21.2 m.
It lifts up to 40,000 kg close in at 2.65 m.
It is rated at 160 tonne-metres.
It is offered with 4 to 9 hydraulic boom extensions.
The COPMA 1400 reaches 35.17 m with the jib fitted.
It carries about 950 kg at that distance.
On the standard boom without a jib it reaches 21.55 m.
It lifts up to 23,540 kg close in at 4.35 m.
It is rated at 140 tonne-metres.
The COPMA 2000 reaches 34.91 m with the jib fitted.
It carries about 1,080 kg at that distance.
On the standard boom without a jib it reaches 21.25 m.
It lifts up to 29,190 kg close in at 4.38 m.
It is rated at 200 tonne-metres.
The COPMA 820 reaches 33 m with the jib fitted.
It carries about 420 kg at that distance.
On the standard boom without a jib it reaches 20.2 m.
It lifts up to 31,900 kg close in at 2 m.
It is rated at 82 tonne-metres.
It is offered with 4 to 8 hydraulic boom extensions.
The COPMA 650 reaches 33 m with the jib fitted.
It carries about 350 kg at that distance.
On the standard boom without a jib it reaches 20.16 m.
It lifts up to 28,500 kg close in at 2 m.
It is rated at 65 tonne-metres.
It is offered with 3 to 8 hydraulic boom extensions.
The COPMA 950 reaches 32.86 m with the jib fitted.
It carries about 805 kg at that distance.
On the standard boom without a jib it reaches 21.53 m.
It lifts up to 27,060 kg close in at 2.9 m.
It is rated at 95 tonne-metres.
The COPMA 450 reaches 30.05 m with the jib fitted.
On the standard boom without a jib it reaches 21.31 m.
It lifts up to 20,270 kg close in at 2.05 m.
It is rated at 45 tonne-metres.
It is offered with 2 to 8 hydraulic boom extensions.
A COPMA loader crane is a truck-mounted knuckle-boom loader crane.
It mounts on a truck chassis and articulates to place loads around a fixed truck position.
It is not a tower crane.
It is not a telescopic mobile crane.
Loader cranes in this category are built to EN 12999, the European standard for loader cranes.
All nine long-reach models belong to COPMA's TOP RANGE line.
Horizontal outreach comes from hydraulic boom extensions and an optional jib.
More extensions give greater horizontal outreach at a lower lifting moment.
The jib adds the final metres of reach beyond the standard boom.
The COPMA 3500 reaches 50.79 m with the jib and 26.65 m on the standard boom.
The COPMA 950 reaches 32.86 m with the jib and 21.53 m on the standard boom.
Operators pick the configuration by the reach and load the job needs.
See these models working on the COPMA channel:
